The Dynascale belt scale model 1030 is easy to handle and install by simply 4 bolts, indoors or outdoors, on stationary or mobile belts. Its robust construction makes it suitable for the most difficult applications on a wide variety of applications.

The weighing frame
Its sleek and robust construction keeps the 1030 weighing frame fully in line with the conveyor frame. This one-piece weighing frame is fully assembled at the factory and is quick and easy to install and integrate into the conveyor belt. The weighing frame is designed to provide additional support and reinforcement to the belt structure, thus minimising deviations. The weigh frame 1030 offers is using 1 or 2 loadcells, depending on the application and belt width and insensitive to vibration, moisture and product accumulation, unlike many other systems.

The belt speed sensor
The WIS526 digital speed transducer is the most reliable and accurate speed transducer ever developed for use with belt weighers. By directly connecting the transducer to the belt reversing roller or a return roller, you are guaranteed an accurate belt run reading. No wheels running over the belt, preventing problems caused by product accumulation or belt slip.

Product Sheet

Dynascale 1030 weighing frame
Weighing section Single trough frame weighing frame
Weighframe design Composed of a weighing platform suspended in pivots and a support beam placed transversely over the conveyor frame. The rigid construction thus reinforces the weighing section of the conveyor.
Weighing frame construction Powder-coated structural steel, optionally galvanised or stainless steel
Space requirement Applicable in any standard conveyor belt
Number 1 or 2
Type Single point, stainless steel, IP68, ATEX optional
Mounting Load on traction
Power supply 10 VDC +-5%
Output 2 mV/V +- 0.1%
Combined error <0.0175 % FS
Non-reproducibility 0.01% FS
Operating temperature -10°C to +40°C
Temperature sensitivity Range 0.00093% FS/°C; Zero 0.00088% FS/°C
Overload Safe To 150% of load cell capacity; Max. to 300% FS
Belt speed sensor WIS526
Type Digital encoder with hollow shaft
Mounting Directly with a coupling on the output shaft of the reversing drum or a return roller
Housing Stainless steel housing, IP67
Mounting accessories Shaft with mounting arm
Weight Approx. 500 g
Weigh integrator
Type WI301
Display Alphanumeric, 5″ colour display
Calibration Zero points, zero point tracking, resistance simulation, weights, calibration chains or product
Communication Protocol of your choice (mA, profinet, profibus, ethernet TCP/IP,…)
Power supply 110 VAC, 240 VAC or 12-30 VDC
Digital inputs Up to 3
Digital outputs Up to 4
Housing Field mount IP69K (228 x 214 x 124 mm) or panel mounting, IP69K (241 x 180 x 47 mm)
Temperature range -10°C to +40°C
Calibrated version (OIML) Available, class 2, 1


More info

    Información básica sobre protección de datos Ver más

    • Responsable: INGEPROA SOLUTIONS S.L..
    • Finalidad:  Responder las consultas.
    • Legitimación:  Por consentimiento del interesado.
    • Destinatarios y encargados de tratamiento:  No se ceden o comunican datos a terceros para prestar este servicio. El Titular ha contratado los servicios de alojamiento web a Ideaconsulting que actúa como encargado de tratamiento.
    • Derechos: Acceder, rectificar y suprimir los datos.
    • Información Adicional: Puede consultar la información detallada en la Política de Privacidad.


    Go to Top