DYNASCALE BELT SCALE MODEL 1020
DYNASCALE BELT SCALE MODEL 1020
Description
The Dynascale belt scale model 1020 is easy to install, indoors or outdoors, on stationary or mobile belts. Its robust construction makes it suitable for the most difficult applications on a wide variety of applications.
The weighing frame
Its sleek and robust construction keeps the 1020 weighing framefully in line with the conveyor frame. This one-piece weighing frame is fully assembled at the factory and is quick and easy to install and integrate into the conveyor belt. The weighing frame is designed to provide additional support and reinforcement to the belt structure, thus minimising deviations.
The weigh frame 1020 offers three-point support by using 1 loadcell and 2 low-friction closed pivot points. These are insensitive to vibration, moisture and product accumulation, unlike many other systems.
The belt speed sensor
The WIS526 digital speed transducer is the most reliable and accurate speed transducer ever developed for use with belt weighers. By directly connecting the transducer to the belt reversing roller or a return roller, you are guaranteed an accurate belt run reading. No wheels running over the belt, preventing problems caused by product accumulation or belt slip.
The Integrator
The WI301 integrator is a weight integrator for dynamic weighing systems. By integrating the mV signal from the load cells in the weighing frame and the pulse signal from the speed sensor, the WI301 integrator generates a readout for the product flow in e.g. tonnes/hour. It is also possible to read out the belt load (kg/m), belt speed (m/s) and the daily counter or total counter (kg or Ton). The integrator can also be equipped with various optional boards for e.g. communication purposes. The integrator can be used for both approved and non-approved applications.
Accuracy guarantee
On installations approved by us, we guarantee that the 1020 belt weighing system weighs and counts within a value of +-0.5 % of the test value. Calibration should be done via a known test weight, calibration chain or our standard electronic calibration.
Product Sheet
| Dynascale 1020 weighing frame | |
|---|---|
| Weighing section | Single trough frame weighing frame |
| Weighframe design | Composed of a weighing platform suspended in pivots and a support beam placed transversely over the conveyor frame. The rigid construction thus reinforces the weighing section of the conveyor |
| Weighing frame construction | Powder-coated structural steel, optionally galvanised or stainless steel |
| Space requirement | Applicable in any standard conveyor belt |
| Loadcell | |
| Number | 1 or 2 |
| Type | S-type, IP65 or IP67 |
| Mounting | Load on traction |
| Power supply | 10 VDC +-5% |
| Output | 3 mV/V +-0.1% |
| Non-linearity | <0.03 % FS |
| Non-reproducibility | 0.01% FS |
| Operating temperature | -40°C to +80°C |
| Temperature sensitivity Range | 0.0014% FS/°C; Zero 0.0027% FS/°C |
| Overload | Safe to 150% of load cell capacity; Max. to 300% FS; lateral force max. 50% FS |
| Belt speed sensor WIS526 | |
| Type | Digital encoder with hollow shaft |
| Mounting | Directly with a coupling on the output shaft of the reversing drum or a return roller |
| Housing | Stainless steel housing, IP67 |
| Mounting accessories | Shaft with mounting arm |
| Weight | Approx. 500 g |
| Weigh integrator | |
| Type | WI301 |
| Display | Alphanumeric, 5″ colour display |
| Calibration | Zero points, zero point tracking, resistance simulation, weights, calibration chains or with known quantity of product |
| Optional communication | mA, profinet, profibus, Ethernet TCP/IP,… |
| Power supply | 110 VAC, 240 VAC or 12-30 VDC |
| Digital inputs | Up to 3 |
| Digital outputs | Up to 4 |
| Housing | Field mount IP69K (228 x 214 x 124 mm) or panel mounting, IP69K (241 x 180 x 47 mm) |
| Temperature range | -10°C to +40°C |
| Calibrated version (OIML) | Available, class 2 |
More info
Información básica sobre protección de datos Ver más
- Responsable: INGEPROA SOLUTIONS S.L..
- Finalidad: Responder las consultas.
- Legitimación: Por consentimiento del interesado.
- Destinatarios y encargados de tratamiento: No se ceden o comunican datos a terceros para prestar este servicio. El Titular ha contratado los servicios de alojamiento web a Ideaconsulting que actúa como encargado de tratamiento.
- Derechos: Acceder, rectificar y suprimir los datos.
